QUUPPA-KF600 KEYFOB optional BUZZER
Description – Application
The QUUPPA-KF600 KEYFOB is fully and ready compatible with Quuppa protocol and eco-system. The Tag is designed to full fill all requirements for people flow management and secure access control use cases.
Thanks to its ultra-low power consumption, the keyfob guaranties un-surpassed battery lifetimes and on top of that its CR2016 battery can be replaced.
Its high precision accelerometer sensor permits to detect any movements, vibrations, shocks or a specific fall. The accelerometer parameters are configurable in order to adjust them to the final needs of the application.
The optional buzzer / vibrator is directly driven by the QPE API Quuppa ecosystem using the associated back channel commands.
All tag configuration parameters can be updated over-the-air through the back-channel commands.
The QUUPPA-KF600 KEYFOB can be proposed with :
- NFC function to provide extra functionalities as registration, access control or micro-payments
- Switch function
- 2 LEDs green and red
The QUUPPA-KF600 KEYFOB can be laser engraved or silkscreen printed.
Quuppa Ready, full compatible
Accelerometer and optional Temperature sensors
Optional additional NFC Forum Tag Type 2 or 5
Two LEDs: Green and Red color
Quuppa Full Compatible
ISO/IEC15693 (NFC Forum Tag Type 5)
ISO/IEC14443 (NFC Forum Tag Type 2)
|Battery Lifetime||Up to 2 years depending on the Quuppa tag parameters|
More than 75 meters for Quuppa
LOS of 200 meters
Up to 10 cm for the NFC interface
|Dimensions||Length : 48 mm – Diameter : 38 mm – Thickness : 8 mm|
|Thermal Properties||– 30 to + 60 °C / – 22 to + 140°F|
|Chemical Properties||IP68 (1m, 24h)|
|Certificates||RoHS & REACH conform. Conflict free sourcing www.conflictfreesourcing.org|
Thank you for taking time to fill out this form :
(fields with * are mandatory)